Walter ICECUT 250 Auto Manual De Instrucciones página 6

•
Before further use of tool, it should be carefully checked to determine that it will operate
property and perform its intended function.
•
Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation.
•
A guard or other part that is damaged should be properly repaired or replaced by an authorized
service centre unless otherwise indicated in this instruction manual.
•
Have defective switches replaced by authorized service centre,
•
Do not use the tool if the switch does no turn it on and off.
16. The use of any accessory or attachment, other than ones recommended in this instruction manual,
may present a risk of personal injury.
17. Have your machine repaired by a qualified Walter technician. This electric tool complies with the
relevant safety rules. Qualified persons using original spare parts should only carry out repairs
otherwise this may result in considerable danger to the user.
18. Never operate the machine if parts are missing or damaged.
19. Never direct jets of water or flammable liquids over the drill.
20. Operator must be physically able to handle the weight of the machine.
21. Operator should be trained in the use of the machine.
3) INFORMATION PLATE SYMBOLS
1
1
1 2
1. Refer to the user manual for operational and safety issues with regard to this machine.
2. Dispose of the machine and electrical components correctly.
3. Eye protection must be worn when operating the machine.
4. Ear defenders must be worn when operating the machine.
2 3
3
4
4
6