Publicidad
Unlocking button for ON/OFF switch
1
ON/OFF switch
2
To start up the device, first press the unlocking button
and then the ON/OFF switch.
Symbols on the device
General warning symbol
Read the operating instructions and all
safety instructions before operating the
device for the first time.
Always wear suitable eye protection and
hearing protection when working with the
device.
Wear non-slip, sturdy gloves when work-
ing with the device.
Keep bystanders at a safe distance from
the power tool.
Do not subject the device to rain or moist
conditions.
Device description
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
See graphics page for illustrations
Illustration A
Battery pack unlocking button
1
Battery pack mount
2
Unlocking button battery pack
3
Handle
4
ON/OFF switch unlocking button
5
ON/OFF switch
6
Branch bow unlocking button
7
Branch bow
8
Front protection
9
Quick clamping device for saw blade
10
Saw blade for wood
11
*Rechargeable battery pack
12
* Optional
Installation
Attaching the battery pack mount
1. Push the mount of the battery pack into the mount of
the sabre saw until it audibly latches into place.
Illustration C
Note
Ensure correct seating!
Mounting the saw blade
CAUTION
Risk of injury from sharp saw teeth
Wear safety goggles and protective gloves when work-
ing on the device.
Illustration F
1. Turn the quick clamping device anticlockwise and
hold it.
2. Insert the saw blade.
3. Turn the quick clamping device clockwise back to
the original position.
Note
After mounting the saw blade, check that it is correctly
seated.
Mounting the branch bow
CAUTION
Risk of injury from sharp saw teeth
Wear safety goggles and protective gloves when work-
ing on the device.
Illustration E
1. Press the branch bow unlocking button.
2. Push the branch bow into the guide until it engages.
Installing the battery pack
1. Push the battery pack into the battery pack holder.
Illustration G
Switching on the device
1. Press the unlocking button.
Illustration H
2. Switch on the device using the on/off switch.
Switching off the device
1. Release the on/off switch.
Illustration H
Sawing techniques
CAUTION
Risk of injury from sharp saw blades
Wear safety goggles and protective gloves when work-
ing on the device.
Flush cuts without branch bow
Note
When sawing thicker branches and boards, work WITH-
OUT the branch bow. The piece to be sawn must touch
the front guard. Apply a rocking motion when sawing
round pieces.
1. Switch on the device.
2. Saw with even pressure.
Illustration I
Insertion without branch bow
Note
When sawing thicker branches and boards, work WITH-
OUT the branch bow. The piece to be sawn must touch
the front guard. Apply a rocking motion when sawing
round pieces.
1. Place the lower edge of the front guard on the work-
piece.
2. Switch on the device.
3. Tilt the saw forward and insert the saw blade into the
workpiece.
English
Operation
13
Publicidad
