Publicidad
Idiomas disponibles
Idiomas disponibles
c. Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the power
tool before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e. Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tools operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
@
Hammer safety warnings
WARNING! Safety instructions for all
operations.
Wear ear protectors. Exposure to noise can cause
u
hearing loss.
Use auxiliary handles, if supplied with the tool. Loss of
u
control can cause personal injury.
Hold the power tool by insulated gripping surfaces,
u
when performing an operation where the cutting
accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give
the operator an electric shock.
(Original instructions)
Additional safety instructions for hammers
Use clamps or other practical way to secure and
u
support the workpiece to a stable platform.
Holding the work by hand or against your body is unstable
and may lead to loss of control.
Wear safety goggles or other eye protection.
u
Hammering operations cause chips to fly. Flying
particles can cause permanent eye damage. Wear a dust
mask or respirator for applications that generate dust. Ear
protection may be required for most applications.
Keep a firm grip on the tool at all times. Do not
u
attempt to operate this tool without holding it with
both hands. It is recommended that the side handle be
used at all times. Operating this tool with one hand will
result in loss of control. Breaking through or encountering
hard materials such as re-bar may be hazardous as well.
Tighten the side handle securely before use.
Do not operate this tool for long periods of time.
u
Vibration caused by hammer action may be harmful to
your hands and arms. Use gloves to provide extra cushion
and limit exposure by taking frequent rest periods.
Do not recondition bits yourself. Chisel reconditioning
u
should be done by an authorized specialist. Improperly
reconditioned chisels could cause injury.
Wear gloves when operating tool or changing bits.
u
Accessible metal parts on the tool and bits may get
extremely hot during operation. Small bits of broken
material may damage bare hands.
Never lay the tool down until the bit has come to a
u
complete stop. Moving bits could cause injury.
Do not strike jammed bits with a hammer to dislodge
u
them. Fragments of metal or material chips could dislodge
and cause injury.
Slightly worn chisels can be resharpened by grinding.
u
Keep the power cord away from the rotating bit. Do not
u
wrap the cord around any part of your body. An electric
cord wrapped around a spinning bit may cause personal
injury and loss of control.
Safety of others
This tool is not intended for use by persons (including
u
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
u
play with the appliance.
Residual risks
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
ENGLISH
5
Publicidad
