Jung BM 240 S1A WW Manual De Operación página 19

Reach setting/adjustment
Assuming an installation height of
2 m, the maximum reach of the sensor
is 12 m. Optimum adjustment of the
detection zone is possible according
to needs. The shrouds
serve to cover any desired number of
lens segments and individually reduce
the reach. Fine adjustment is also
possible by turning the sensor hous-
ing by ± 80°. The shrouds
be divided vertically or horizontally
Technical specifications
Dimensions (H x W x D):
Mounting height:
Output:
Connection:
Angle of coverage:
Adjusting possibilities:
Reach:
Time setting:
Brightness setting:
IP rating:
along the grooved divisions, or cut
with scissors. After removing the dec-
orative ring
suspended on the upper part of the
provided sensor lens. The decorative ring
subsequently to be reapplied and the
shrouds
False switching by cars and pedestri-
ans, etc. is therefore ruled out, or risk
can areas deliberately monitored.
Incandescent / halogen lamp load
Fluorescent-lamp electronic ballasts
Fluorescent lamps, uncorrected
Fluorescent lamps, parallel-corrected
Low-voltage halogen lamps
LED < 2 W
2 W < LED < 8 W
LED > 8 W
Capacitive load
Capacitive load
horizontal
vertical
rotating
19 19
, the shrouds are to be
are fixed firmly in place.
AC 230 ... 240 V ~, 50 Hz
max. 12 m (electronically stabilised)
approx. 10 s ... 15 min
approx. 2 ... 2000 lx
is
84 x 89 x 90 mm
1.8 ... 4 m
1000 W
1000 W
500 W
500 W
1000 VA
16 W
64 W
64 W
132 μF
132 μF
240°
180°
160° horizontal
IP 54