Assembly; Unpacking; Packing List; Attaching Grass Deflector - McCulloch Li 40T Manual De Instrucciones

Unpacking

This product requires assembly.
• Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
WARNING! Do not use this product
!
if any parts on the Packing List are
already assembled to your product
when you unpack it. Parts on this list
are not assembled to the product by
the manufacturer and require customer
installation. Use of a product that may
have been improperly assembled could
result in serious personal injury.
• Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
• Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.

Packing list

Part Name
String trimmer
Auxiliary
handle
Guard
Operator's
manual
WARNING! If any parts are damaged or
!
missing, do not operate this product until
the parts are replaced. Use of this product
with damaged or missing parts could
result in serious personal injury.

ASSEMBLY

Figure Qty
1
1
1
1
WARNING! Do not attempt to modify
!
this product or create accessories
not recommended for use with this
string trimmer. Any such alteration or
modification is misuse and could result in
a hazardous condition leading to possible
serious personal injury.
WARNING! To prevent accidental starting
!
that could cause serious personal injury,
always remove the battery pack from the
product when assembling parts.

Attaching grass deflector

WARNING! The line cut-off blade on the
!
grass deflector is sharp. Avoid contact
with the blade. Failure to avoid contact
can result in serious personal injury.
• Invert the string trimmer to access the trimmer
head.
• Using a Phillips head screwdriver, remove the
preinstalled screws (a) from the trimmer head.
• Place the guard (b) onto the trimmer head and slide
the guard onto the head by following the track on
the head.
• Align the screw holes on the guard with the screw
holes on the trimmer head.
• Insert the screws into the trimmer head, fastening
the guard in place.
• Place the guard cap (c) on to the guard and slide
the guard cap onto the guard.
• Align the screw holes on the guard cap with the
screw holes on the guard.
a
b
English - 7