Publicidad
Idiomas disponibles
Idiomas disponibles
Commissioning/ Operations
Scope of delivery
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
Description of the Appliance
Illustrations on Page 2
1 Coupling element for water connection
2 Suction hose for detergent
3 Appliance switch "0/OFF"/ „I/ON"
4 Storage for trigger gun
5 Transport handle
6 Storage for accessories
7 Mains cable with mains plug
8 Connection for water supply with filter
9 High pressure connection
10 Trigger gun
11 Lock trigger gun
12 High pressure hose
13 Spray lance with pressure regulation
(Vario Power)
14 Spray lance with Dirtblaster
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Before Startup
Illustration
Mount loose parts delivered with appliance
prior to start-up.
Illustration
Pull out the clamp for the high-pressure
hose from the trigger gun (e.g. with a
small screwdriver).
Connect high pressure hose to trigger
gun.
Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
14 English
Water supply
Note: Impurities in the water can damage
the high-pressure pump and accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Water supply from mains
Observe regulations of water supplier.
For connection values, see type plate/tech-
nical data.
Caution
Garden hose (not included) must be at
least 1/2 inch or 5/8 inch in diameter, mini-
mum length 7.5 m.
Screw the coupling element to the wa-
ter connection on the appliance.
Push the garden hose onto the coupling
element, then connect it to the water
supply.
Start up
Caution
Dry runs lasting longer than two minutes
lead to damages to the high pressure
pump. If the appliance does not build up
pressure within two minutes, switch it off
and proceed as instructed in the Chapter
"Troubleshooting".
Connect the high pressure hose to the
high pressure connection of the appli-
ance.
Push the spray lance into the trigger
gun and fasten it by turning it through
90°.
Completely open the water tap.
Insert the mains plug into the socket.
Turn on the appliance "I/ON".
Publicidad
