muvit io MIOSTR001 Manual De Instrucciones página 35

Note: Despite making the connection via Bluetooth, the device
will connect to the router's Wi-Fi network, allowing you to control
the device from anywhere at any time. If the new device detected
screen does not appear, close the application completely, open it
again and repeat the above installation steps.
Connection via EZ Mode (standard):
Activate Phone Location. Once the application is open,
press "+" or "Add device". Select the purchased product
to enter the installation wizard. Check that the LED is
flashing rapidly, if not, follow the prompts in the app to
reset it, tick the "Flashing rapidly" tick and press "Next".
Enter the password, press "Next" to enter the network
connection process and follow the app's instructions to
complete the installation.
Note: Due to possible updates of the application, the installation
process of the product may change. Please follow the instructions
in the app itself for proper installation.
6
English