Publicidad
Idiomas disponibles
Idiomas disponibles
Technical specifications
ACCURA Cutting
Machine
(MODEL CW002)
· Input voltage of AC/DC adapter 100-240 V
· Frequency 50/60Hz, 0,2 A
· Power 7W
· DCBL engine
· 8 combs 1.5 / 3 / 4.5 / 6 / 10 / 13 / 16 / 19 mm
· 2 speeds 5500+/-200 - 6500+/-200 RPM
· Weight 290 g
· LED light display
· Charging time 2,5-3,5 hours
· Time of use 120-150 min
· Li-ion 2200 mAh battery
· Life time 1000 hours
BDN Cosmetics S.L. · C/ de la Mora 22
08918 Badalona, Spain
6
Instructions for use
COMPONENTS:
LOWER BLADE
UPPER BLADE
LEVER FOR
BLADE
ADJUSTMENT
SWITCHING ON/OFF
UNIVERSAL VOLTAGE
CHARGER
8 COMBS
How to charge the machine
Place the cutting machine on its bottom side
1
on the reloading base.
Connect it to the mains. The indicator on the
2
cutting machine lights up, signaling the start
of recharging.
UNIVERSAL
CLEANING
VOLTAGE
BRUSH
CHARGER
FIRST CHARGE:
The device can be charged by connecting it directly to the power
supply adapter or via the base.
1) Direct connection: connect the the power supply adapter to the
socket on the bottom of the appliance.
2) Connection via the charger base: connect the power adapter to
the socket on the back of the charger base. Place the device in the
compartment provided in the base.
3) In both cases, connect the plug the power supply adapter to the
power supply socket, making sure that the appliance is switched off.
4) Charge the device for 3.5 hours before using it for the first time.
RECOMMENDATIONS FOR EXTENDING BATTERY LIFE:
· Do not charge the device until the battery is exhausted or the
battery is low.
· Fully drain the battery at least once every six months.
· Do not charge the battery longer than recommended; overcharging
reduces battery life.
· Make sure that the appliance is completely dry.
· Make sure the device is switched off or switched off by pressing the
on/off button.
· Charge the device as described in the previous section 'First charge'.
7
Publicidad
