Publicidad
Idiomas disponibles
Idiomas disponibles
EN
UNIFIX100
PANEL COMPATABILITY
With the design based on the use of Oblong drilling, Unifix can be used with different kind of panels on the
market.
Unifix 20 is ment to fix 1 panel only, with the spacings and dimensions of panels as indicated below.
Oblong fastening system
Support
L
Unifix 100
1070
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with
the panel:
Support
Unifix 100
= 4,4 kg
Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate
barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination
and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow (eg
tree)
Before attaching and connecting, please observe:
•
the maximum distances between each element shown below.
•
connecting order
SAFETY INSTRUCTIONS
•
Take the appropriate mesures to prevent accidents during your mounting steps.
•
If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
•
When finished, check and ensure that all of your brackets and panels are fixed properly.
10
Dim
Number of
panels
H
x 3
x1
x 2
550
●
Unisun 80.12M/ 100.12M / 100.24M / 110.12BC
H (e)
Centre distance and panel dimensions
Spacers for fastening
of each panel
(in mm)
L (e)
H (e)
340 > 885
180 > 510
Panel
www.uniteck.fr
L (p)
L (e)
Panel Dimension
Max
L (p)hh
H (p)
550
No max
=6,3kg / 7,5kg / 7,5kg / 7kg
H (p)
Total
weight
Of panels
(In Kg)
12
Publicidad
