Publicidad
Idiomas disponibles
Idiomas disponibles
2. Place five-line laser instrument LAM09-01 at point A (the side of the laser instrument embedded with the
logo opposite to the driving direction) to ensure that the red dot on the case aligns with the point A.
3. Suspend a plumb line LAM09-06 against the center of the rear vehicle emblem and let it naturally drop to
the ground. Mark the front center point of the vehicle (Point B) on the ground directly under the plumb.
Lightly flick the string with your fingers several times to confirm that the string is perpendicular
to the ground.
4. Place the laser reflector LAM09-03 parallel to the vehicle and ensure that the reflective stripe is aligned
with point B.
5. Place the auxiliary mirror LAM09-04 in front of the vehicle.
6. Ensure that five-line laser instrument LAM09-01 is level, turn on the laser beams of the five-line laser
instrument LAM09-01.
If the vehicle chassis is too low, the five-line laser instrument LAM09-01 cannot be placed
under it, just move it a bit far away from the vehicle emblem.
7 . Observe the position of the laser beam with the auxiliary mirror LAM09-04. Rotate the fine-tuning knob
(5) of five-line laser instrument LAM09-01 to ensure the longitudinal laser beam aligns with the reflective
stripe of the laser reflector LAM09-03.
30
www.topdon.com
Publicidad
