TOPDON PHOENIX ADAS MOBILE PX1000 Manual Del Usuario página 33

2.3.2.2 Determine the placement location of the PHOENIX ADAS MOBILE
The placement location of the PHOENIX ADAS MOBILE varies with the vehicles being serviced. Please
strictly follow the on-screen prompts to determine it. In general, it includes the following possible options:
A. Measuring target/pattern board to front bumper
Mark point C in front of point A on the center line P , making sure that the distance (L) between point A and
point C is the value specified in the on-screen app instructions.
B. Measuring target/pattern board to front hub center
1. Place L-shaped positioning bracket LAM09-05 in the front hub center.
2. Mark point D in front of the L-shaped positioning bracket, making sure that the distance (L) between
point D and L-shaped positioning bracket is the value specified in the on-screen app instructions.
3. Mark point C on the center line P to make the line from point C to point D is perpendicular to the center
line P .
C. Measuring target/pattern board to front camera
1. Place L-shaped positioning bracket LAM09-05 on the side of the vehicle to align it with the camera.
www.topdon.com
31