Descargar Imprimir esta página

Ardea MOBILITY 230 E Manual De Instrucciones página 48

Publicidad

Idiomas disponibles

Idiomas disponibles

14
E) Battery indicator
• Indicates the available battery level.
• GREEN: fully charged.
• YELLOW: care must be taken because the battery is at half charge.
• RED: the battery is at less than half charge.
F) Four direction indicators
Press the button once to activate simultaneous flashing of both direction indicators; flashing is
accompanied by an acoustic signal. Press again to deactivate them.
G) Switching on the lights
Press the button once to switch on the lights.
Press the button again to switch off the lights.
H) Direction indicators
Press the buttons to activate the direction indicator.
1.
Press the left-hand button to activate the left direction indicator.
2. Press the right-hand button to activate the right direction indicator.
3. The direction indicator will switch off automatically after 15 sec. Press the button again to
deactivate it sooner.
I) Battery charger socket
The battery charger socket is positioned on the steering to avoid having to lean down to charge
the batteries.
WARNING!
• The battery chargers are selected precisely for specific applications and are
particularly suited to the type, dimensions and chemical formulation of the specific
batteries. For the safest and most efficient charging of your scooter's batteries, it
is recommended to use the battery charger supplied with the scooter. Any charging
method that charges the batteries individually is prohibited.
• Do not attempt to disassemble or remount the batteries on the scooter.
• If the battery charger has not been tested and approved for external use, do
not expose it to adverse weather conditions. If the battery charger is exposed
to adverse or extreme weather conditions, adaptation to the difference in
environmental conditions must be allowed before using it in closed environments.
L) Driving mode selector
The High/Low switch is located under the control panel on the steering and has two positions
for setting the speed.
H - indicates the highest speed
L - indicates the lowest speed
M) USB port
11.2 Steering adjustment
The steering adjustment lever is positioned in front of the steering handle on the left side.
1. Pull the steering adjustment lever towards the steering handle to disengage it;
2. With the steering adjustment lever disengaged, continue to hold it and simultaneously push
or pull the steering into the desired position;
3. Release the steering adjustment lever to lock the steering in position.
(Fig. 1)
(Fig. 1)

Publicidad

loading

Productos relacionados para Ardea MOBILITY 230 E

Este manual también es adecuado para:

Mobility 240