Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLING & CLEANING FOAM WET FILTER
INSTALLING FOAM WET FILTER
1. Verify that the power cord is
disconnected from the outlet.
2. Remove the powerhead and place in an
upside-down position. Follow instructions
to remove the reusable cloth filter on
page 18.
3. Carefully slide the foam wet filter down
over the filter cage making sure the
cage is completely covered.
4. Place the powerhead onto the collection
tank.
CLEANING FOAM WET FILTER
1. With the removed powerhead in an
upside-down position, carefully remove
the foam wet filter.
2. Use a mild soap and water solution to
wash the foam wet filter and rinse with
clean water.
3. Allow the wet filter to air dry for 24
hours before installing onto the filter
cage.
- 19 -
Publicidad
