Motion CM-12 Manual página 12

Single select 5 channel remote
5
To activate
5.1
Single select,
simultaneously
hold the centre
button and press
the pair button.
12
5.2
1 1
+
5. SINGLE SELECT 5 CHANNEL REMOTE
Single select makes it possible to activate program mode on
a single blind through a remote control, without having to
physically press the program button on the blind.
The remote
starts searching
for blinds (search
mode). This is
indicated by the
LEDs flashing
from left to right.
Once a blind is found,
5.3
the channel LED will
flash and the blind
starts stepping,
indicating that program
mode has been
activated. The blind
can now be (un)paired
with the remote and/or
programmed.