5. PRE-OPERATION CHECKS:
CHECKING THE ENGINE OIL:
Ensure that the generator is on a at and level surface before adding oil. Remove the oil
cap and check the level of the oil. Add oil to the generator if the oil is below the indicator
line. Always ensure that your engine oil is clean.
OIL FILLER CAP/DIPSTICK
OIL CAPACTIY FOR THE VARIOUS GENERATOR MODELS:
IB-G3500 - 0,6 L
RECOMMENDED ENGINE OIL:
Only use 4-stroke automotive oil (API or SE) alternatively you can use a higher grade
(SG, SH or SJ). SAE 10W-30 o 10W-40 is recommended for general all-temperature use.
If single viscosity oil is used, select the appropriate viscosity for the average temperature
in your area.
SINGLE GRADE
MULTIGRADE
AMBIENT TEMPERATURE
OIL FILL HOLE
(BOTTOM EDGE)
5KW
-20
-4
UPPER LIMIT
LOWER LIMIT
10KW
20KW
#20
10W-30
10W-40
-10
0
14
32
#30
#40
10
20
30
50
68
86
40°C
104°F