KTM 79011955044 Instrucciones De Montaje página 50

6 ASSEMBLY OF HUSQVARNA MOTORCYCLE MODELS
–
Insert the large battery (not included) into the battery compartment with the battery terminals facing forward
and secure with holding bracket
–
Mount and tighten original screw
Guideline
Screw, battery holding bracket
–
Connect positive cable
Guideline
Screw, battery terminal
The contact disks must be mounted under the cable sockets with the claws toward the battery terminal.
–
Connect negative cable
Guideline
Screw, battery terminal
The contact disks must be mounted under the cable sockets with the claws toward the battery terminal.
–
Slide positive terminal cover
–
Slide negative terminal cover
Final steps
–
Remove air filter box cover (see owner's manual).
–
Install the right side cover (see owner's manual).
–
Mount the seat (see owner's manual).
24
2
.
dn
.
M6
do
to the battery.
M5
dp
to the battery.
M5
dq
over the positive terminal.
dr
over the negative terminal.
504009-01
6 Nm (4.4 lbf ft)
2.5 Nm (1.84 lbf ft)
2.5 Nm (1.84 lbf ft)