Bosch GWX18V-10P Instrucciones De Funcionamiento Y Seguridad página 16

Disconnect battery pack from tool before making any assembly, adjustments
or changing accessories. Such preventive safety measures reduce the risk of
starting the tool accidentally.
Installing Side Handle
The Side Handle (Fig. 4, 7) is used to control
and balance the tool.
Securely thread handle into either side of gear
housing, depending on personal preference,
comfort, and operation being performed.
The handle should always be installed onto the
guard protected side of the tool, see Fig. 6. Use
the side handle for safe control and ease of op-
eration.
Fig. 4
(7)
Assembly
Hand Shield
(sold separately)
The Hand Shield (Fig. 4, 6) is to be used with
backing pads, sanding discs, and wire brushes
to keep fingers and hand away from work sur-
face, sharp edges, burrs and debris.
When using the hand shield, insert side handle
through hole in shield and then thread into
housing (Fig. 4). Ensure that hand shield is po-
sitioned between hand and backing pad, sand-
ing disc or wire brush.
(6)
(Sold separately)
-16-