Publicidad
Idiomas disponibles
Idiomas disponibles
Always use your appliance with feet fixed.
Note: if you choose to place the heater on the floor, you do not
need to fix the wall support.
USE
1. Switching on the power
First, turn on the switch located on the right side of the heater. This is the main
power supply to the appliance.
2. Adjusting the flame brightness
3.Heating
In standby mode, press the heater button to turn on the heater.
Press the power button to switch to standby mode and trigger
the flame effect. Press the power button to enter the operating
or standby mode, and the heating function and flame effect will
stop (the fan will stop after 30 seconds).
In standby/on mode, press the flame button to reduce the
brightness. Each time the flame button is pressed (up to 4
times), the brightness will decrease. When the flame button is
pressed for the fifth time, the brightness will return to its initial
state.
In standby mode, when you press the heater button on the
control panel or on the remote control, the heating power is high
(1800W) and the indicator light comes on. If you press the button
again, the heating power will be reduced (900W). If you press the
heating button for the third time, the heating function will stop
and the heating fan will stop automatically after 30 seconds.
29
Publicidad
