Publicidad
Idiomas disponibles
Idiomas disponibles
2. Fold back the power cord and put it in the water tank. Make sure
the tank is dry.
3. Clean the air filter.
4. Store in a cool, dry place.
INSTALLATION
Empty the water tank before each use of the appliance.
The appliance must remain in an upright position for at least 24 hours
before it is put into operation. This period must be observed if the appliance
has been transported.
When using the appliance, doors and windows must be kept closed to
prevent energy loss.
Install the unit in an upright position on a flat, stable and dry surface as
shown in the sketch below :
Observe the following minimum distances :
20 cm minimum on front / back and sides
78/85
Publicidad
