E N G L I S H
T EC HN IC A L I N F ORMAT IO N
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
I NSTA LL AT I O N CO N SID E R ATI ONS
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
⁄ This faucet may be used with a continuous flow
water heater if the flow pressure is at least 20 PSI.
⁄ This mixer is equipped with a flush stream, which
enhances the natural side of the life element water.
As this flush stream does not contain any air, we
recommend the use of Axor Massaud sinks or very
deep sinks to prevent splashing.
2
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
1.1 GPM
1⅜"
1⅝"
⁄ This faucet does not include a drain or a pull rod.
⁄ The included adapters must be used. They adapt
Do not permanently remove the filters as
⁄ Keep this booklet and the receipt (or other proof of
the G ⅜ supply hoses to ⅜" stops. The adapters
include sediment filters. If the flow from the faucet
diminishes over time, clean the filters (see page 10).
debris from the water line will damage the
faucet.
date and place of purchase) for this product in a
safe place. The receipt is required should it be neces-
sary to request warranty parts.