Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING
GRILLE REMOVAL (MODELS 160, 560 & 569)
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grille.
1. To release the Front Grille,
remove the 4 screws located
on the back of the inlet grille,
located roughly at 2, 5, 7 and 10
o'clock positions.
Screw
2. Dust or wash Front Grille with a
mild dishwashing soap. Do not
place grille in the dishwasher.
The excessive heat can distort
the plastic.
3. To reattach - position the Front
Grille so the Vornado logo in
the center of the Front Grille is
Screw
straight. Replace all the screws.
Use the brush attachment on your
household vacuum cleaner to
vacuum any accumulated dust off
the Front Grille and Air Inlets.
10 English
Screwdriver required.
Screw
Note: The motor is
permanently lubricated
and requires no oiling.
Screw
CLEANING
GRILLE REMOVAL (MODELS 360 & 460)
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grille.
1. Feel for bumps on back of prod-
uct, close to inlets, that help to
locate screws at roughly 12, 3, 6
and 9 o'clock positions. Remove
the 4 screws located at these
positions, releasing the grille.
2. Dust or wash Front Grille with a
mild dishwashing soap. Do not
Screw
place grille in the dishwasher.
The excessive heat can distort
the plastic.
3. To reattach - position the Front
Grille so the Vornado logo in
the center of the Front Grille is
straight. Replace all the screws.
Use the brush attachment on your
household vacuum cleaner to
vacuum any accumulated dust off
the Front Grille and Air Inlets.
Screwdriver required.
Screw
Note: The motor is
permanently lubricated
and requires no oiling.
Screw
Screw
11
English
Publicidad
