Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE SCHEDULE
Action
Inspect the tightness of the
bolts and nuts
Saw chain lubrication
Perform frequent maintenance works when the equipment is used in dusty areas.
These items should be serviced by the service dealer unless you have the appropriate tools and mechanical
knowledge.
FREQUENTLY ASKED QUETIONS/ TROUBLESHOOTING
Question/Problem - Cause
Cause
Poor performance:
• The battery is discharged;
The saw chain does not turn:
• Check that the chain brake lever is not engaged;
The guide bar and saw chain overheat:
• Lack of oil in the tank;
• Over tensioned chain;
• Obstruction in the lubricating nozzle;
Chain brake lever does not work:
• Faulty mechanism;
The chainsaw does not cut well:
• Saw chain is loose;
• Saw chain is worn out;
• Saw chain is damaged;
The guide bar vibrates abnormally:
• The bolts are incorrectly tightened;
1st month or
20 hours
Every 3 months
Every 6 months
or 50 hours
or 100 hours
Solution
• Charge the batteries or replace them;
• Pull it towards the motor;
• Fill;
• Loosen a little;
• Clean the nozzle;
• Call an authorized service center;
• Adjust the saw chain tension;
• Sharpen the saw chain or replace it;
• Replace it;
• Tighten them well;
Every year or
300 hours
33
Publicidad
