Commercial CHEF CHC18MB Manual De Usuario página 16

ENGLISH
TROUBLESHOOTING & WARRANTY
TROUBLESHOOTING
If any errors occur during operation, please check the following table to diagnose the
issue before calling for service. Below are common errors and the checks to perform.
Problems
After connecting the power and
pressing the "power" key, the
appliance has no response
Heating being interrupted in normal
use and a "Beep" will be heard.
Heating stops suddenly during
operation.
Failure
codes
Page 16
E6
E7, E8
E1, E2, E4, E5, U1, Eb
Points to check
- Make sure that the plug is inserted tightly.
- Make sure that the switch, socket, fuse and
power line are in good condition.
- Check the root causes carefully. If the
problem cannot be fixed, please contact
Service Center for checking and repairing.
- Make sure that the containers are suitable
for induction cooker.
- Send Induction Cooker to service facility for
repair.
- Let the appliance cool down.
- Check that vents are free and clear from
clutter. Remove any debris near intake/
exhaust vents. Operate the appliance again
after cooling down.
- Refer to failure codes.
After a moment, temperature inside the
cooker returns to normal. The unit can
return to normal operation once the "Start/
Stop" button is pressed.
After adjusting the voltage, the unit can
return to normal operation.
Send it to service facility to repair.