Commercial CHEF CHC18MB Manual De Usuario página 8

ENGLISH
SET UP & USE
STARTING YOUR APPLIANCE
After inserting the plug into the socket, a "Beep" will sound and the indicator display
will flash, indicating the appliance is connected to a power source and in standby
mode.
Do Not put an empty container on the ceramic plate before switching on the
appliance.
NOTE: During standby mode, if no function button is pressed for approximately 60
seconds, the induction cooker will switch off automatically.
When cooking/on mode is active, if there is no proper pot on the ceramic plate, the
induction cooker will switch off automatically a few seconds later (no more than 60
seconds).
POWER FUCTION: In order to select the power intensity you can:
- Either press the + (7) or - (8) buttons
- Or select it using the temperature slider between the + and - buttons, by swiping
your finger from left to right on the button.
To guide you, lights appear above each power level.
OPERATING INSTRUCTIONS
Preparation Work
Page 8
① Clean the cookware and the induction cooker.
Please make sure there are no foreign substances
such as water and rice grains left at the bottom of
the cookware and on the induction cooker.
② Make sure the plug is connected to the power
supply, and the indicator screen displays "-- --".
③ Place suitable cookware on the center of the
cooking zone of the Induction Cooker.