TRUSST CT-UTVM Guía De Referencia Rápida página 7

EN
Wall Mounting
Drywall
Concrete Wall
You can mount the TV onto the wall by first attaching the mounting plate to
the wall.
1. Locate 2 wooden studs.
2. Line up top left hole of the mounting plate to the wooden stud.
3. Attach the mounting plate to the wall with 1 hex screw and 1 washer.
4. Using the built-in bubble level, adjust the mounting plate.
5. Drive in 3 additional hex screws and washers.
Note: Do not over-tighten.
Mount the mounting plate to at least 2 wooden studs and use all 4
screws when mounting the mounting plate to drywall.
1. Place the mounting plate at the desired height.
2. Using the built-in bubble level, adjust the mounting plate and mark 6
holes.
3. Drill 6 holes into the concrete and insert 6 concrete anchors.
4. Attach the mounting plate to the concrete wall by driving 6 hex screws
and washers through the mounting plate and into each anchor.
Note: Do not over-tighten.
Use all 6 screws when mounting the mounting plate to the concrete wall.
7
CT-UTVM QRG