Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Starting operation
1. Pull the coarse dirt scraper across
the wiping attachment to remove
heavy soiling (such as dried bird
droppings).
2. Set the spray nozzle to the "ON" po-
sition
3. Press the spray lever and spray the
window cleaner evenly onto the sur-
face to be cleaned from a distance
of 8 in. (20 cm).
4. Loosen the dirt using the microfiber
wipe cover.
10
5. Set the trigger to the "ON" position.
The device switches on.
The remaining run time in minutes is
displayed.
6. Pull the squeegee blade over the
surface to be cleaned to vacuum up
the waste water.
Note
Only work with the device until the
MAX mark of the waste water tank is
reached. Switch off the device and
empty the waste water tank (see chap-
ter Emptying the waste water tank).
Observe the following points to prevent
streaks appearing:
● Only glide the squeegee blade over
the surface to be cleaned, do not
press too hard.
● Hold the device at the correct angle
to the surface to be vacuumed. The
distance between the lower end of
the device and the surface should
be approx. 4 in. (10 cm).
English
Publicidad
