Duronic GLH60 Manual De Instrucciones página 15

Change the units of measurement
To change the units, lift up the kickstand on the back of the device and press the
small button underneath it. This will allow you to change it from Centigrade to
Fahrenheit.
The Memory
The memory function records the highest and lowest levels of humidity and
temperature.
1. To view the recorded highest and lowest levels from the previous day, press
the 'MEMORY' button. This will show last recorded highest levels. Press
'MEMORY' again to show the lowest recorded levels.
2. To return to the home screen press the 'MEMORY' button again or leave it
idle for 20 seconds and it will return to the home screen.
3. If you want to delete the recorded measurements, press and hold the
'MEMORY' button. Once deleted, the screen will return back to the home
screen.
Note: if you experience any issues with the hygrometer, remove the battery and
re-insert it again. This will resent the device and should resolve any problem you
were experiencing.
15