PARTS
Yellow LED
Door lock
cover
Knob
Door lock for emergency key
PLACING BATTERIES
Remove the cover
OPEN THE SAFE BOX
Enter the security code and press the letter A or B. If the code is correct, the green LED will light up.
If the code is wrong, the yellow LED will flash and a sound will sound.
When you enter the code erroneously 3 times, the device will not accept any other code for 20 seconds. If
you enter again 3 wrong codes, the box will lock and emit an audible alarm. To unlock the alarm, remove
and replace the batteries.
Remember that if you have assigned a code, it will be lost when you remove the batteries, so
the factory code will be reactivated (159)
NOTE: In case that you forget the security code, use the emergency key to open the box. Insert the key
into the door lock and turn to the right while turning the knob to the right side.
SPECIFICATIONS
Specifications may vary without previous notice
Input: 6 V - - - (4 x AA)
Instruction manual
SEG-475
MINI ELECTRONIC
SAFE
V0.5
0518m
Red LED
Green LED
1
2
3
A
BCD
EFG
Alphanumeric keyboard
4
5
6
H
IJK
LMN
Keys A or B confirm
7
8
9
OPQ
RST
UVW
the entered code
A
0
B
XYZ
B
Place 4 AA Batteries
A
IMPORTANT
Before using the product, read this instruction carefully to avoid any malfunction.
The information presented serves only as a reference for the product. Due to updates there may be differences.
See our website www.steren.com for the latest version of this manual.
CAUTIONS
• Children should be supervised to ensure they do not use the device as a toy.
• Do not expose the device to extreme temperatures.
• This device is not intended for use by people (including children), whose physical, sensory or mental abilities are
different or reduced, or who lack experience or knowledge.
• Any unauthorized repair can cause malfunction and will void the warranty.
Batteries compartment
Reset code button
ASSIGN A SECURITY CODE
1
Press the red button located inside the battery compartment. The yellow LED will lights on
2
Enter a code for the next 20 seconds, you can enter 3 to 8 digits.
3
Press A or B. The green LED will lights on
The factory default code is 159
Make sure for not leave the emergency key inside the box and place it in a safe place.
INSTALL THE SAFE BOX
The safe box includes 4 blast-holes to install
the box on a flat surface.
TROUBLE SHOOTING
TROUBLE
• Use the semergency keys to open the box and check the condition
The safe box can not be opened
of the batteries. Replace them with new ones if they no longer
have a charge.
• Keep the key in the closed position and turn the knob
to the left to close the door.
The safe does not close
• Check that the knob is in the correct position. Use
the emergency key and turn it to the left while turning the knob to
the left side.
Batteries compartment
cover
SOLUTIONS