Publicidad
Idiomas disponibles
Idiomas disponibles
04 USING A WIRED
CONNECTION
1
2
HDMI OUT
HDMI IN
(ARC)
Connecting using an HDMI Cable
(External Device (HDMI) / TV ARC/eARC)
OPTICAL OUT
Connecting using an Optical Cable (D.IN)
NOTE
• When the TV sound is not output, press the
Function) button at the top of the Soundbar or the
(Source) button on the remote control to select
the "D.IN" mode. The screen displays "D.IN" and "TV
ARC/eARC" in sequence, and TV sound is played.
• The recommended cable is a Premium High Speed
HDMI Cable with Ethernet certified by HDMI.org.
• When you use an optical cable and the terminals
have covers, be sure to remove the covers.
Using the Q-Symphony Function
When the Soundbar connects to a Samsung TV that
supports the Q-Symphony function you can play the
sound simultaneously through the Soundbar and the TV.
If you use the Q-Symphony function, the surround sound
played on the TV allows you to enjoy a richer, more
three-dimensional surround sound effect.
When the Soundbar is connected "TV+Soundbar" menu
appears on the TV.
(Settings (
) → All Settings (
Output)
Using the SpaceFit Sound
This function analyzes the user's listening space with the
Soundbar's microphone and provide optimal sound for
the space. Sound optimization proceeds automatically.
HDMI Cable
Optical Cable
(not supplied)
DIGITAL AUDIO IN
(OPTICAL)
HDMI
1
1
HDMI TO TV
(eARC/ARC)
DIGITAL AUDIO IN
2
(OPTICAL)
HDMI 1
HDMI 2
(Multi
) → Sound → Sound
ENG - 4
05 USING A WIRELESS
CONNECTION
Connecting via Bluetooth
Top of the Soundbar
OR
What is the difference between BT READY and BT
PAIRING?
• BT READY : In this mode, you can reconnect any
Samsung TV or mobile device that was connected
before.
• BT PAIRING : In this mode, you can connect a new
device to the Soundbar.
(Press the PAIR button on the Soundbar remote
control or press and hold the
on the top of the Soundbar for more than 5 seconds
while the Soundbar is in "BT" mode.)
NOTE
• If asked for a PIN code when connecting a Bluetooth
device, enter <0000>.
Connecting via Wi-Fi (Wireless
Network)
• To connect a Soundbar to a mobile device via a
wireless network (Wi-Fi), the SmartThings app is
required.
1. Connect your mobile device (smartphone, tablet, etc.)
to the Wi-Fi network the TV is connected to.
2. Install and launch the SmartThings app on your
mobile device (smartphone, tablet, etc.).
3. Follow the instructions in the app screen on the
mobile device to connect the Soundbar to your Wi-Fi
network.
5 sec
BT PAIRING
OR
(Mic On/Off) button
Publicidad
