Amplicomms BigTel 1200 Manual De Instrucciones página 129

Handset settings
1. In idle state press the menu key
2. Select Settings and press
3. Select Handset settings and press
- Select base: if your handset is registered to several base
stations, you can select the active base with
- Display: select Contrast and set the desired contrast
- or -
Select Handset name and, if necessary, change the name for
the handset.
- Language: select the display language.
- Auto answer: with this function activated, an incoming call
is accepted directly when you take the handset from the
base station - you do not need to press any key.
- Memory Keys: Select one of the direct dial keys from the list
(M1 / M2), press
this key.
- Register handset: select a new base station, enter the PIN of
the new base station and perform the necessary steps at the
base station.
Example: to register a new handset on the BigTel 1200/1202,
press the page button on the base station for approx. 5 s
(beep). The PIN of the BigTel 1200 is in delivery state "0000".
- De-register: Enter the PIN of the base station and select the
handset that you want to de-register. Answer the query with
.
- Handset reset: You can reset the handset to delivery state.
Enter the PIN (in delivery state "0000") and answer the
query with
Helpline 0844 800 6503 (See page 25 for costs and hours of operation)
.
and enter the number to be stored on
.
.
.
.
23