Berner 411329 Instrucciones De Manejo página 7

5. CHARGING THE SOLDERING IRON
1. Insert the USB-C plug in the USB-C port on the
soldering iron.
2. Connect the USB plug to a power bank, a computer,
a 12 V charging adapter for cars or a domestic charging
adapter.
• After approx. 3.5 hours, the battery should be fully
charged.
• When the battery is fully charged, the charge indicator
turns green.
ENVIRONMENTAL ADVICE
Never dispose of the device with normal household waste. Dispose of the device using
an authorised waste disposal company or your local waste disposal authorities.
Pay attention to the current regulations. In case of doubt, contact your waste disposal
authorities. Ensure that all packaging materials are disposed of in an environmentally
friendly manner.
7
(EN)