Publicidad
Idiomas disponibles
Idiomas disponibles
EN
DESCRIPTION
-
Distributed audio for PA installations with 100 speakers, also with low impedance output.
-
Versatile player for background music.
-
It has 4 zone outputs with volume control for different music levels per zone.
-
User-friendly operation and a modern, discreet design.
CONTROLS AND FUNCTIONS
FRONT PANEL
1
2
3 4 5 6 7
1.-
: indicator light and on/off switch of the amplifier.
2.- Information display.
3.-
| : in USB mode, enable/disable random play.
-
RPT ONE: repeats 1 song.
1
-
RPT ALL: repeats all.
-
RANDOM: plays all songs in random order.
4.- {: a long press decreases the volume of the player. A short press, in Bluetooth
the previous audio track; in FM mode it jumps to the previous stored frequency.
5.- 12: in Bluetooth
®
frequencies with sufficient signal quality.
6.- }: a long press increases player volume. A short press, in Bluetooth
track, in FM mode skips to the next stored frequency.
7.- MODE: short presses of this button allow you to change the mode on the player to choose the desired
audio source.
8.- Z1/Z2/Z3/Z4: volume controls for output zones Z1, Z2, Z3 and Z4 on the rear panel.
9.- CH 1- PAGING MIC/CH2/CH3/CH4: controles de volumen de las entradas CH 1, CH 2, CH 3 and
CH 4 inputs on the rear panel.
10.- MASTER: control de volumen de la entrada seleccionada por el selector INPUT.
11.- INPUT: input source selector: AUX 1, AUX 2 or the built-in player (FM radio, USB or Bluetooth
12.- USB port for audio file playback.
13.- SIGNAL signal status indicator light. Lights up when signal is detected at the inputs.
14.- CLIP: signal peak indicator light for each input. If it lights up lightly or occasionally you should reduce
the output volume. If the indicator light stays on continuously, it is because the input signal is very high.
In this case, reduce the input signal volume.
15.- PROT: protection indicator light. Lights up when the temperature channel protection is activated. With
protection enabled, the audio output of that channel is cut off. If this happens, turn off the computer,
make sure that the vents for air intake and exhaust are free of obstructions and turn down the volume
of the input signal.. Wait a few minutes for the appliance to stabilize before you switch it on again.
8
2
3 4
or USB mode it plays/stops audio playback; in FM mode, it auto-stores of all detected
9
5
6
7
8
9
10
11
- 2 -
10
11
12
13
14 15
PROX-240Z
PA AMPLIFIER
or USB mode jumps to
®
~230 V AC, 50/60 Hz, FUSE: T4 A
~115 V AC, 50/60 Hz, FUSE: T8 A
POWER CONSUMPTION: 480 W
or USB skips to the next audio
®
12
131415
).
®
Publicidad
