Crosby IP IPTK Manual Del Usuario página 6

See illustrations 3 - 6 for part reference.
1. Open the clamp by turning the handgrip (X) counter-clockwise, so that jaws fit comfortably over
EN
the profile (3).
06
2. Hold the clamp in position over the profile and close the clamp by turning the handgrip (X)
clockwise. Ensure that the clamp closes properly and securely (E) (4).
3. IPTKUD: blocking the spindle: Pull lever (H) and turn left. The spindle can only be locked in the
vertical and horizontal position of the handgrip.
4. The load can now be lifted with it making no difference whether the clamp is used as lifting
clamp or as temporary tackle eye.
5. As soon as the load is at its destination, the clamp must be fully free of load. The lifting eye (D)
(chain/cable for IPTKW clamps) must be able to move freely (5).
IPTKUD: de-blocking the spindle: Pull lever (H) and turn right.
6. The clamp can now be removed. Open the clamp by once more turning the handgrip (X)
counter-clockwise and remove the clamp from the profile (6).
5. A reliable clamp, a secure basis for lifting
10 Year warranty preventive maintenance procedure:
Parts should be replaced only when they no longer meet our standards.
10 Year warranty repair procedure:
Parts should be replaced only when they no longer meet our standards.
Please consult www.thecrosbygroup.com/resources/crosbyip-10-year-guarantee for more infor-
mation on maintenance procedures.
Maintenance without 10 year warranty: Annually clamps are subjected to inspection* and parts will
be replaced only when they no longer meet our standards.
*CrosbyIP authorised repairer
Copyright © 2021 The Crosby Group LLC. All Rights Reserved.