Crosby IP 2 IPNM10 Manual Del Usuario página 4

USER MANUAL
For clamp types:
EN
04
© The Crosby Group LLC. Nothing from this original user instructions publication may, in any way
whatever, be replicated or published without prior written permission from The Crosby Group LLC.
1. General
You have chosen a CrosbyIP lifting clamp.
CrosbyIP lifting clamps are the most reliable lifting clamps available. But using reliable tools does
not automatically mean that practices are reliable. The people who work with clamps play an
equally important role in reliable lifting. Ensure that everyone who works with CrosbyIP lifting
clamps has been instructed in the proper application of the clamps.
CrosbyIP provides a 10 year warranty for its clamps. To keep CrosbyIP lifting clamps in optimum
condition and keep warranty, regular maintenance is important. Preventive maintenance and repair
shall be carried by a repairer authorized by CrosbyIP. In order to benefit from this warranty pro-
gramme and for more details on maintenance procedures, please consult www.thecrosbygroup.
com/resources/crosbyip-10-year-guarantee for more information.
Please read and understand these instructions before using the lifting clamp.
2. Safety precautions
„ Proper instruction for the personnel is of vital importance. This will contribute to maximum
reliability in the working environment.
It is not
„ 2 IPNM10 clamps may be applied per piece, per set or several at the same time for the lifting
permitted to stay
of plates.
in the danger
„ Ensure that each clamp receives its proportionate share of the load. When using two clamps
zone of the load.
or more, a spreader beam is recommended.
„ Contact your CrosbyIP Customer Service Centre before using this clamp for plates and
Ensure that the
constructions that have a radius.
load remains on
„ Temperature: the operating temperature is between –20 ºC (–4 ºF) and 70 ºC (158 ºF). For other
the ground when
temperatures contact your CrosbyIP Customer Service Centre.
turning.
„ There are restrictions for operation in special atmospheres (e.g. high humidity, explosive, saline,
acid, alkaline).
No changes may
„ Loads: For proper application of the clamp consult the load diagrams 1.
be made to
„ Ensure that all attachments between lifting eye and crane are properly fitted, secured and
CrosbyIP
coupled.
clamps. Never
„ For each lift only one plate may be transported or lifted.
straighten,
„ The clamping yaws may not be placed on sloping or conical surfaces. Contact your CrosbyIP
attempt to bend
Customer Service Centre for assistance in selecting a clamp suitable for bevelled plates.
or heat treat
„ When the crane hook or attachment is too large and/or too heavy, use properly sized CrosbyIP
parts.
5000 stinger assembly or a chain sling with D-shackle of 75 cm (30 inch), with a strength that
corresponds to the W.L.L. of the clamp. This will, when setting the load down, prevent the
Copyright © 2021 The Crosby Group LLC. All Rights Reserved.
2 IPNM10
Vertical lifting without damage