EZiclean iMap A100 Manual Del Usuario página 17

3. Cleaning the water tank
- Remove the water tray from the robot and rinse it with clean water.
- Wait until it is completely dry before placing it on the robot.
4. Microfiber cleaning
- Remove the microfibres and wash them in water or in the washing machine.
- Dry them flat.
Note :
Do not use microfibres that are too wet to prevent them from flooding the floor. The robot could then slip during the cleaning cycle
and not work properly.
Use the water tank only on hard floors (parquet, tiles, marble and painted hard floors, etc.).
5. Cleaning of sensors and connectors
Use a clean, dry cloth to lightly wipe the sensors and connectors.
Here is their position below:
Charging connectors
Sensors Sensors
Charging connectors
Technical characteristics
Dimensions (mm): 320 x 85
Weight (kg) : 2,800
Max. surface area : 120m2
Navigation technology : Navig+TM - Mapped
Max. decibels 60dB
Battery : Lithium-ion
Autonomy : 90 min
Charging time : 4/6 hours
Automatic return to base : Yes
Corner Detection Technology : CornerTM Technology
Obstacle Detection : Yes
Water tank : Yes
Surfaces : Tile, Linen, Carpet, Rug
Capacity : 330mL
Anti-Allergen : HEPA filter
Remote control : Yes
Mode of use : Targeted, Baseboard, Manual, Zigzag, Automatic