Baby Trend SMART STEPS WK02A Serie Manual De Instrucciones página 6

ASSEMBLY
3 • If assembly required:
Underneath the walker,
thread the end of the
support strap through
the loop on the seat
bottom. Slip the strap
through the slot at
the end of the height
adjustment bracket
(Fig. 3a).
• Next thread the
support strap through
the opening in the
rectangular D-ring and
pull snug (Fig. 3b).
• Loop the D-Ring
through the support
strap (Fig. 3c).
TO REMOVE THE SEAT FABRIC
4
To remove the seat fabric
•
reverse steps 3c, 3b and
3a, followed by the reversal
of steps 2c through 2a.
9
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 3a
Fig. 3b
Fig. 3c
Fig. 4
FRONT WHEELS
5
• Place walker on a solid
flat surface with bottom of
base facing upward. Insert
the pins of the front wheels
into their housing, pressing
them until they snap into
position. Please check
that wheels are locked into
place before proceeding
(Fig. 5).
REAR WHEELS
6
• Insert the pins of the rear
wheels into their housing,
pressing them until they
snap into position. Please
check that wheels are
locked into place before
proceeding (Fig. 6).
• For replacement / removal,
see Step 13.
STOPPERS
7
• Push the stopper into the
housing completely
(Fig. 7). Repeat for the
other sides.
• Ensure to apply enough
pressure when inserting
the stoppers.
• The Stoppers are there for
Stair Safety reasons, do NOT
remove the stoppers unless
for replacement purposes. For
removal, see Step 12.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Front
Fig. 5
Back
Fig. 6
Fig. 7
10