Publicidad
Idiomas disponibles
Idiomas disponibles
INFORMATION
PLACING CHILD IN THE WALKER
WARNING:
slipping out of the seat, check that both feet
of the child touch the floor. Never carry walker
with the child in it, as the child may get hurt or
slip out.
• Always check the walker prior to each use to ensure that the
seat is snapped in place and that the walker has no loose
or broken parts. Do Not use the walker if it is damaged or
broken or missing parts.
• Before placing your child in the walker, please determine
that your child is developmentally ready for this type of
product. Generally, your child must be able to sit upright
unassisted and have adequate neck strength to exhibit very
good control of his or her head. Typically, a child should be
at least 6 months of age to use this product. Infants develop
at different rates and you should discuss the use of a walker
with your pediatrician to ensure that your infant is ready.
• Adjust the seat height of the walker to the lowest setting.
Place your child in the walker and check that both feet
touch the floor. The child should have only part of their
weight on their feet when their legs are straight. Adjust the
walker height as needed as your child grows. Do not adjust
height with child in the walker. Discontinue using the walker
if your child attempts to climb out, reaches 30 pounds in
weight or 32 inches in height, or when your child is able to
walk unassisted.
• The baby walker can be used for 3 different heights.
To adjust height, remove baby from walker. Adjustment
instructions can be referenced in step 1. Adjust to desired
height.
• When the position has been selected, check that the
safety button turned through 90 degrees to prevent the
accidental release of the mechanism. Always follow this
procedure. Never use the baby walker if the button is not in
the sideways position. Important: Never change the height
when the baby is in the walker.
15
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
To reduce chance of child
PARA ENSAMBLAR EL ANDADOR
IMPORTANTE:
Nunca cambie la altura si el
bebé está en el andador.
1
•
Para abrir el andador,
y levante la bandeja
y ubique la palanca
debajo de la bandeja
(Fig. 1a).
• Para ajustar la
altura: Tuerza la
palanca, deslícela
verticalmente y
empújela hacia
arriba para ajustarla
(Fig. 1b).
• Verifique que la
palanca esté trabada
en su lugar después
"parte inferior"
de ajustar la altura
(Fig. 1c).
NOTA: El andador
para bebés puede
utilizarse en tres
alturas diferentes.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
MONTAJE
Fig. 1a
XX
Fig. 1b
"parte inferior"
Fig. 1c
16
Publicidad
