Publicidad
Idiomas disponibles
Idiomas disponibles
Changing the water filter
To drink the freshest and cleanest water
from your refrigerator, change the filter
on time.
Please kindly follow these steps:
1.
Shut off the water supply. Then turn
the water filter (K) about a 1/4 turn,
counter-clockwise.
Note:
filter, please use the enclosed tool which
provide in package as above. Insert the
tool into the filter housing and rotate it
counter clock wise (to the left) 90 degrees.
Please keep for future use when changing
the water filter.
K
2. Pull the water filter (K) from the filter
holder (L).
L
Note:
To change the water filter easily, shut off
the water supply valve.
Sometimes, it is hard to disassemble the
water filter because impurities in the
water cause it to stick. If you are having
difficulties, grip the water filter firmly and
pull it out.
When you pull the water filter, a little
water can leak from the opening.
This is normal. To minimize the water
leaks, keep the filter cartridge horizontal
when pulling it.
To prevent overflow, empty the water
filter tray (M) and dry around the filter
case.
To insert the new water filter, follow the
directions below.
M
3.
Insert the new filter into the filter holder.
K
4.
Push the filter, and then turn it clockwise
until it locks.
If you have trouble inserting the water
filter because of high water pressure, shut
off the water supply valve.
5.
If you turned off the water supply, turn it
back on.
15
Publicidad
