Publicidad
Idiomas disponibles
Idiomas disponibles
3. Connect 1/4'' extension tubing to shutoff
valve outlet.
Saddle-Type
Shutoff Valve
Packing Nut
Outllet Valve
4.
Flush the tubing. Turn the main water
supply on and flush out the tubing until
the water is clear. Then, shut the water
off at the water valve after about a quart
of water has flushed through the tubing.
Connect the extension tubing line with
5.
the line on the back of the fridge with
the coupler. Fully insert the extension
tubing into the coupler, and then insert
the clip onto the coupler to lock up the
tubing. Do the same with the other
end. After both of clips are inserted,
check the line to make sure it is held
firmly by the clips.
Water line
Coupler
Compression Nut
1/4" Extension
tubing
Ferrule(sleeve)
Clip
Water line
Note:
Ensure that the water line does not get
pinched or bent when installing.
This can result in improper water flow
through the line and will affect the
functionality of the fridge.
6. Turn the water on and check for
leakage.
CAUTION!
Check to see if leaks occur at the
water line connections.
Connect Water Line to Refrigerator
IMPROTANT:
If you turn the refrigerator
on before the water is connected, turn
off the ice maker.
1. You may need to purchase below
items to complete this connection.
And you may find these items sold
as a kit at a local hardware store.
a b c
a
b
c
2.
Unplug refrigerator or disconnect
power.
3.
Close shut off value.
Ferrule (Sleeve) -1 pcs
1/4" Compression Nut - 1 pcs
1/4" Water Line - 1 pcs
9
Publicidad
