Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Fully charge the device before first use. Long press the power button "
unit, and the battery status icon "
pump unit with the USB cable and power adapter (not included) when the battery is low (one
bar of power).
2.
When the pump is turned on, press the side switch button "
or to begin pumping on both sides; press the cycle button "
3.
Press the mode switch button "
while in stimulation mode. After 2 minutes, the pump will automatically switch to expression
mode, and the icon "
above two modes to simultaneously stimulate and express breasts; use this mode as needed.
Note: This pump is powered by a built-in li-ion battery. When the
battery status indicator shows one bar of power, it is recommended
to charge the pump as soon as possible using a certified 5V 2A
adapter (not included).
Night Light Button
Charging Port
" will stay on to show the remaining battery. Charge the
" to select a preferred mode. The icon "
" will remain visible. The 2-in-1 mode "
" to choose which side to pump
" to select the optimal suction cycle.
" scientifically combines the
- 06 -
" to turn on the pump
" will remain visible
Publicidad
