Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCCTION
Thank you for the purchase of our quality
product. Used carefully and in accordance
with the instructions set out below.
Please read and keep these instructions for
future reference.
INSTALLATION AND ASSEMBLY
1. This light is designed for easily replacing
for the existing Par56 lamp. It can be fitting
to the niche housing of your Par56 swimming
pool light.
2. This light is designed to have perfect sealing
for the cable connection to achieve highly
waterproof Feature
3. The light must be used or operated while fu-
lly submerged under water only. Never switch
on the light if it is not underwater.
INSTALLATION
1. Build the Niche in the poll wall.
2. Connect the fixture / housing.
3. Fix the housing into niche by screw.
4. Installation diagram.
1)
2)
CAUTION
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or ins-
truction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it res-
ponsibly to promote the sustainable reuse of material
resources. To return your used device, please use the re-
turn and collection systems or contact the retailer where
the product was purchased. They can take this product
for environmental safe recycling.
CLEANING
Disconnect the appliance from the mains and let it
cool before undertaking any cleaning task. Clean
the equipment with a damp cloth with a few drops
of washing-up liquid and then dry. Do not use sol-
vents, or products with an acid or base ph such
as bleach or abrasive products, for cleaning the
appliance. Do not submerge the appliance in water
or any other liquid, or place it under a running tap.
ANOMALIES & REPAIR
3)
1. Build the Niche in the poll wall.
2. Connect the fixture / housing.
3. Fix the housing into niche by screw.
4. Installation diagram.
CORRECT DISPOSAL OF THIS PRO-
DUCT
This marking indicates that this product
should not be disposed with other house-
hold wastes throughout the EU.
www.garsaco.com | 11
EN
Publicidad
