Listo RTFL 85-50b3 Instrucciones De Uso página 19

transported in the upright position, or 24 hours if
the appliance was transported in the horizontal
position. This is to allow the refrigerant gas to go
back down into the compressor. Not respecting
this waiting period may damage the compressor.
• This refrigeration appliance is not intended to be
used as a built-in appliance.
C
Limate CLass
Install the appliance only in a location where the room temperature matches the
climate class for which it was designed (see table below) .
The climate class is on the rating plate located on the outside of the appliance. The table
below shows the correct room temperature for each climate class:
Climate class
If the room temperature is below or above the indicated room temperatures, the
performance of your appliance may be affected and your food may spoil.
s
uffiCient VentiLation
Make sure there is good air circulation behind the appliance, and do not push it against
a wall to prevent noise from vibrations. Make sure that air can always circulate freely
around the appliance. Insufficient ventilation will cause the appliance to malfunction
and increase energy consumption.
L
eVeLLing
For vibration-free operation, the appliance needs to be in a level
position. To do this, adjust the adjustable front feet to properly balance
the appliance.
r
eVersing the opening direCtion of the door
You can reverse the opening direction of your refrigerator door. To do this, follow the
instructions below.
SN
N
ST
T
Room temperature
from +10 to +32°C
from +16 to +32°C
from +16 to +38°C
from +16 to +43°C
19 V.1.0