Publicidad
Idiomas disponibles
Idiomas disponibles
Generalsetting
All parameters can only be set when your e-bike stops.
The steps for general setting are as follows:
In the power-on state, when the display shows the speed of 0,
(1) Press and hold the buttons
options;
(2) Press the button
/
modification interface;
(3) Press the button
/
(4) Press the button
to save the parameter and return to the selection interface of general setting options;
(5) Press and hold the button
interfaces of general setting options arc available:
Trip distance reset
tC refers to the trip distance reset item. tC-n means not to reset the trip distance, and tC-y means to reset the trip distance.
Press the button
to enter the parameter modification interface. Press the button
save the parameter and return to the selection interface of general setting options.
and
at the same time for more than 2 seconds to enter the selection interface of general setting
to switch the selection interface of general setting options, and press the button
for parameter selection;
to save the parameter and exit the selection interface of general setting options. The following selection
Backlight Luminance Setting Interface
/
for parameter selection.Press the button
11
to enter the parameter
to
Publicidad
