FIG.5 BASKETBALL ASSEMBLY
13. Attach the Crooked Pole (#19) to the end of Billiard Table using two Butterfly Bolts (#11)
per Crooked Pole. See FIG.5A.
Note: The butterfly Bolts (#11) assembled on the holes in the end apron of Billiard.
See point 9 on page 5.
14. Attach the Rim (#30) to the Basketball Board (#7) using four Bolts (#10) and four Nuts (#13).
See FIG. 5B.
15. Attach the Short Pole (#20) to the back of the Basketball Board (#7) using four Bolts (#9)
and four Nuts (#12). And then install the Rod Cap (#28) on the top of the Short Pole (#20).
See FIG.5C.
FIG.5B
FIG.5
6
FIG.5A
FIG.5C