6
Cleaning
Keep the TrapMaster clean. After use turn off the TrapMaster and clean the TrapMaster properly for dust and dirt. Use a wet
piece of cloth with a little mild detergent. Do not soak the TrapMaster in water. Dry the TrapMaster gently after cleaning. After
cleaning, store the TrapMaster in a dry and safe environment. The TrapMaster must not be stored in a moist and damp area for a
longer period of time.
7
Troubleshooting
7.1
Troubleshooting and general fault identification
When irregularities are detected during operation of the machine, an investigation must be carried out as soon as possible. By
rapid intervention and correction of the irregularities, a dangerous situation may be prevented, as well as avoiding unnecessary
wear and strain on the machine. If the TrapMaster does not start working properly after having been turned off and restarted a few
times, the machine must be sent to our manufacturing address.
In the event of repetitive errors due to an unknown fault, an overall inspection of the machine is to be performed. Should the is-
sues persist, contact the manufacturer by phone or email, stating your challenges.
8
Disposal
The product is subject to Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE) and 2006/66/EC on batteries and accumulators and waste batteries and accumulators.
The symbol indicates that this product including the battery must not be disposed of with your other
household waste. Batteries, electrical and electronic equipment contain substances, which may
cause damage to human health and environment if not recycled correctly. It is your responsibility to
hand over this product to a local designated WEEE collection point for recycling. When handing
over for correct recycling you help to prevent these products straining nature and environment un-
necessarily and to protect human health. For more information, please contact your local city office
or your household waste disposal service.
Integral Battery: The built-in battery is a Li-Ion type. Do not disassemble the product for disposal.
This requires special knowledge to do in a safe manner.
9
Copy of the EC declaration of conformity
Manufacturer and compiler of the technical file:
Name:
Address:
Zip code and city:
Hereby declare that the machine of type:
-
Is manufactured in accordance with the following Community directives:
-
2006/42/EF Machinery directive
-
2014/30/EU EMC-directive
Friis Arne Petersen
EC Declaration of conformity
2006/42/EF appendix II A
Nordic Sporting Clays ApS
Sankt Peders Stræde 45B, 2.
1453 – Copenhagen K
TrapMaster
CEO
Position
www.nordicclays.com/quickstart
Copenhagen K
Place
14-06-2022
Date
10