Publicidad
Idiomas disponibles
Idiomas disponibles
10:
Grip
11:
Clay target
a.
Can be loaded in the shaft both ways (7)
2.6
Function of the TrapMaster
The TrapMaster is switched on with the power switch (1), the clay(s) (11) is mounted on the Shaft (7), the three "claws" are acti-
vated by the blue load button (8), the firing and acceleration of the clay(s) is activated by the red fire button (9). When the rotating
speed of the clay(s) corresponds to the setting of the stepwise power regulator (6) the shaft moves a bit forward at the same time
as the claws retract and the clay(s) flies out of the TrapMaster and the rotation of the shaft stops shortly thereafter. When the
shaft stops spinning, the TrapMaster is ready for a repetition of the process.
2.7
Technical specifications
Weight
2.0 kg.
Electrical power supply
Rated voltage:
Max charge current:
Recommended charger:
2.8
Emission, noise
The A-weighted emission sound pressure level, LpA, produced by the TrapMaster does not exceed 70 dB(A).
2.9
Operating and storage conditions
good visibility on
Outdoor with
Permitted ambient temperature range during operation and
storage.
Recommended ambient temperature range for long time stor-
age (over 3 months).
Recommended ambient temperature range during charging.
Permitted relative humidity (non-condensing)
Recommended relative humidity for long time storage (over 3
months).
EMC Environment
2.10
Intended service life of the machine
The TrapMaster is expected to work for 5 years. After the 5 years, the TrapMaster must be serviced or refurbished at an overhaul
by the manufacturer.
15 V DC
1.2 A
TDX-1501200
permanent or temporary clay pigeon shooting ranges.
www.nordicclays.com/quickstart
Environment
-10 to +40 °C
20 ±5 °C
0 to +35 °C
Min. 20 %
Max. 90 %
65 ±20 %
B, (R
e sidential properties, light-industrial locations or com-
parable areas)
7
Publicidad
