WerkaPro 10384 Manual De Instalación página 5

English
Wall light: solar lamp
How solar light works
During the day, the solar light is switched off and the solar panel converts the solar energy produced by the sun to charge the battery. At night,
the light turns on automatically using the stored energy.
The duration of the light depends on its location, the weather conditions and the availability of seasonal lighting. The solar lamp is ideal for
lighting your garden, lawn, paths and patios at night. You can also charge the solar light outside during the day and use it inside in the evening to
light your home.
Choosing the right location
A lack of sunlight will mean that this product will not work to its full potential. An ideal location for the solar light is outside with direct sunlight
on the solar panel. It should receive at least 6 hours of direct sunlight per day. Shaded areas affect the charging of the batteries, which can shorten
the working time of the light at night. The solar light should not be placed near artificial lighting, such as street lamps, as this could affect the
sensor inside the panel and eventually turn it off.
How to use the sunlight
The power switch is usually located at the back of the sunlight.
When the environment becomes dark, the light will automatically turn on. This will change to a brighter white light for about 30 seconds if the
PIR sensor detects movement. In daylight, the sunlight automatically turns off and stores the sun's energy.
Install the lamp with the sensor
on a solid wall with the screws provided (see Fig. A)