WerkaPro 10384 Manual De Instalación página 6

Precautions
This product is not designed for adverse weather conditions (such as rain and wind) or during the winter months. It is advisable to store this
product during these periods using conditions. To store your lights safely indoors, clean and dry the lights, turn off and remove the batteries. Note
that the light is designed to work when the environment becomes dark. If there are strong light sources nearby, the light may be very dim or not
work at all.
Warnings
 Keep these instructions for future use.
 Do not expose the solar light to direct heat, flames or submersion in water.
 LED bulbs are not replaceable.
 Remove exhausted batteries immediately.
 Make sure the batteries are installed with the correct polarities according to the diagram inside the battery compartment.
If the LED does not light up automatically at night, please check the following points:
1) Has the solar panel had at least 6 hours of direct sunlight charging during the day with the switch turned to "AUTO"?
2) Make sure the solar light is in the "AUTO" position at night
3) Check the battery to ensure that the ends are in contact with the terminals
4) Make sure the solar panel is clear