MusicMan BT-X60 Manual Del Usuario página 7

Switch on/off
To switch on, press and hold the On/Off button (2) for at least 2
seconds until the speaker plays a sound. The speaker is now in
pairing mode and can now be used.
To switch off the loudspeaker, please press and hold the On/Off
button again for at least 2 seconds. The loudspeaker signals the
switch-off with a tone.
Connecting to Bluetooth devices
Pairing establishes a connection between the BT-X60 and a
Bluetooth device. If there is no pairing for 2 minutes, the
speaker will cancel the pairing process and turn off.
Note that the speaker must already be turned on before
initiating the pairing process.
Note: Activate the Bluetooth function on your mobile phone and
set it to search for Bluetooth devices in the vicinity. For
information on how to do this, refer to the operating instructions
of your mobile phone.
Now select the speaker "MusicMan BT-X60" from the list of
available devices and establish a connection. When prompted
to enter the PIN code, please enter "0000" to pair the speaker
with your phone.
If the pairing process was successful, you will hear a connection
tone and the speaker can be used.
7
Model: BT-X60 Article no.:4970; 01/2022