RISCO Group LightSYS Manual De Instalación Y Programación página 223

sounder.

Parámetros

Lamp Times

(si está instalado)
Nota
Acceder a este sub‐menú requiere que haya una sirena instalada en el local. Para detalles, ver
página ¡Error! Marcador no definido..
Dispositivo: Sirena
Teclas

 
 
 
 
Parámetro
Parámetros
Sirena X
The Siren menu enables defining all Parámetros of an external
siren that can be connected to the LightSYS as a bus accessory.
Up to four sirens (designated as
and each can be assigned to any partition. Connection to the bus
enables remote control and diagnostic support for a siren.
Label
As appropriate, rename the sounder's label, as per the key
definitions on page ¡Error! Marcador no definido..
Flash
Set this Parámetro when a strobe light is to be associated with a
bus accessory siren dispositivo. See
Marcador no definido.
Control
[ProSYS [8][2][1]]Defines the strobe operation mode

Always Off ‐ The strobe is deactivated.

Follow Bell — The strobe is activated when the siren bell is
triggered.

Follow Alarm — The strobe is activated when an alarm occurs
in the selected siren's partitions.
Por defecto

) can be added to the LightSYS

Follow Bell
Página 223
Rango
page ¡Error!